Civil & Sitework
Meyers Construction
Sites prepared for
the next phase.
Plan the handoffs between removals, excavation, utility work and the required ground condition. Explore the scope your site needs, then send the plans for review.
Focused capabilities
Choose the scope you need reviewed.
Use these scopes to identify the work you need reviewed. If your project crosses several scopes, one project review can start the conversation.

Civil Construction & Sitework
Excavation, backfill, grading, topsoil, tracking, seeding, and restoration.
View capability →
Underground Utilities
Trench excavation, access, existing utility constraints and proposal-defined installation support.
View capability →
Land Clearing & Site Preparation
Define clearing limits, retained features, access and the ground condition required after the work.
View capability →In the field
Sitework from the field
Separate field examples: open trench excavation in Bentonville, a grading work area and an aggregate access route.

Open trench excavation
Open trench excavation in Bentonville, Arkansas.

Ground preparation
Exposed soil across a rough grading work area.

Site access
An aggregate access route through a wooded work area.
What this work looks like in the field
Excavation in motion. A defined final condition.
These are separate Meyers field examples. Together they show the work—not a single before-and-after project.


Project proof · Springdale, Arkansas
Sunset & Powell Demolition — Springdale, AR
Structure demolition, debris removal and disposal, below-grade slab and foundation removal, rough grading, and specified site stabilization performed for a regional general contractor in Springdale, Arkansas.
View the project case study
Start with your site
What must this site be ready for?
Start with the next construction phase: access, grades, utilities, drainage, stabilization and the work another contractor will receive.
What could change the scope?
Existing utilities, soil information, earthwork quantities, testing requirements and final elevations affect a sitework proposal. Mark assumptions instead of treating them as settled.
Plan the material as part of the scope
Keep soil, concrete and vegetative material distinct in the scope. Confirm onsite handling, offsite acceptance, haul access and the condition required by the next phase.
Construction & demolition material management · Use the planning checklist
Early planning
Understand likely project scale.
Use the land-clearing calculator for a preliminary dollar planning range where the scope qualifies. Other conditions need review. This is not an official Meyers Construction quote.
From scope to a project review
Let’s review your site.
A review connects the required finished condition to the plans and site information needed to define the work.
Send the location, available civil plans, the work limits and the required handoff condition. You do not need every answer before contacting us.
Request a Project ReviewPrefer to discuss the unknowns first? Call (479) 249-7383.